new Issues
I am not aware that whether this forum is front end of UseNET Group or not because i sent same posting over there,if you get duplicates,please let me know so that i dont send post on both sides1)http://www.geocities.com/r_ali_s2000/blogs/sqlmobileerror.png
its happened after i ran Configuration WEB SYNCH WIZARD from SQLMOBILE 2005 TAB,it appeared when i went to add a datasource within VS studio
2)http://www.geocities.com/r_ali_s2000/blogs/vpcerrpr.png
-since i am running VPC,it adds a Virtual Card,i assigned an IP (192.168.0.2) to my virtual network card.
- in VS studio,tools->option->devices,i selected DMA Transport and then changed IP from 127.0.0.1 to 192.168.0.4
with in Emulator,i went in Connection and after going in advance tab i set network Type to nEC2001 and it showed the error ,mentioned in images
please help/guide me,i uploaded snapshots for better understanding
The error coming from the emulator indicates that you are missing the Virtual Switch driver which should be installed along with your emulator installation. In the network properties of the desktop or virtual pc network adapter, you should see an entry called "Virtual Machine Network Services. If you have a Beta2 build, you should be able to reinstall this driver by reinstalling the emulator package (vs_emulator.exe) from your installation cds/dvd.
Another solution is to connect your emulator through ActiveSync instead of activating the emulator's network adapter. You can do so through the Device Emulator Manager, available from the "Tools" menu. From the manager, you can virtually craddle an emulator so that ActiveSync will connect to it. You can use the "Get Connected" wizard from ActiveSync, or select the "DMA" option in the connection settings. Note that ActiveSync only supports one connected device at a time, so make sure you do not have any connected device when you do this. Afterward, you will be able to use the virtual pc network connection as if a real device was connected to this computer.
