Recent update: 2008-3-21
Hi I am using Microsoft Device Emulator 1.0 Community Preview On a XP SP2 box I run Emulate Pocket PC WM 2003 SE I have ActiveSync 3.7 working OK and can copy files etc between the PC and "device" ( Guest Partnership ) On attempting to load an application, Destinator ( Ver 3 ) from PC to the ...
689 byte By
Wasim at 2008-3-6
Hi all,I have an I-Mate Pocket PC with Bluetooth ports COM4,COM5.Also I have two external devices a GPS receiver,Printer.The two devices can connect the Pocket with Bluetooth connection.I built a small application in VS.Net 2003 to read data from the GPS receiver, and to write these data to the ...
Whidbey is something new to me, and i think i'll need a little more time to switch over to try...By the way, i've got another question on the WinCE emulator...How can i verify that the emulator is able to receive incoming messages?From the WinCE emulator window, i couldn't find any network ...
How can I get the File Explorer and Task Manager installed on my emulator? Thanks!
Hi! If somebody can please guide me over here, it will be greatly appreciated. I want to run an application (written in VB.net) that triggers another application on my pocket PC. Is this possible?I know it works for windows envoirnment but I am not too sure if it will work for Pocket PC ...
Everytime I start the emulator I have to set its show on top property. Is there someplace to set this so the emulator will always be on top?
Hi, I've installed: VS 2005 Beta2 Windows Mobile 5 SDK for Smartphone Localized Windows Mobile 5.0 Smartphone Emulator Image (CHS) ActiveSync 4 and DMA patch.. I can select DMA transport for the original emulator, but there is no DMA transport option is available for the localized emulator, ...
Hi,I've got a problem, I can connect with emulator using IDE command "tools - conncet to device", when ActiveSync4.0 is in "not connected" state. I'm wondering whether Visual Studio is linked to emulator using ActiveSync? So what is the relationship among Emuator, Device emulator manager, ...
Is there some special order of installing the differnt programms? I'd like to have VS2005 beta2 (Team Suite Edition) Active Sync 4.0 Device SDK 5.0 DMA update But I'm not able to get it working (the connection between Device Emulator & Active Sync & VS2005) I always get a "Cannot ...
Hi, Is there any way in which I can record audio on the smartphone 2003 emulator? I know that it isn't supported by default, but I was just wondering if there was anything that could be tweaked to enable it?
My project compiles, the emulator is launched, but I get a dialog box which states: The operation could not be completed. Alternatively, I won't get the dialog box, but I'll get a status message in the IDE which states: Connect to device failed.The log messages (see below) state that all ...
I would like to debug my program on my laptop using the emulator. I am currently using Visual Studio .NET 2003. Visual Studio will copy the program out to the emulator, along with all the necessary files, and even install the CAB files, but it will not launch the application for debugging. I ...
I'm probably doing something very stupid but I'd appreciate any assistance.I am trying to get up to speed on Windows Mobile 5.0 development and I have installed (in this order):Visual Studio 2005 Team Suite Beta 2DMA Transport UpdateWindows Mobile 5.0 SDKs for Pocket PC and SmartphoneWhen I ...
Hi Guys, i've installed VS2005 Beta,but i can't find WindowsCE emulator on device's list, how can i use WindowsCE Emulator ? with VS2003 it is present and it works very good. thanks a lot.
177 byte By
xjchia at 2008-2-20
Hi,recently I download the device simulator preview,it is a wonderful tool,but my application will be deployed to a window CE of japanese version,is there a jap version? thanks
500 byte By
iouri at 2008-2-19
Hi everybody!I am using web services on my localhost for the Windows CE client application. Everything is working fine with VS.Net 2003 PocketPC 2002 emulator, but when I trying to use the same client application with VS.Net 2005 Pocket PC 2003 emulator, its cannot connect to the server. I ...
The Microsoft Device Emulator was developed only for the use with Visual Studio?If I try to use it with other tools like Visual Web Developer or Editors I have to start it with the command line. But if I want to open mobile web pages ("C:\Programme\Microsoft\Device Emulator ...
Hi!I am working with visual studio 2005 beta2 and compact framework 2.0 beta 2. I have troubles deploying a program to the device emulator.I'm getting this error: Error 1 Deployment and/or registration failed with error: 0x80070003. Das System kann den angegebenen Pfad nicht finden. Conman ...
I don't understand it!I have tried to run an application on the Visual Studio beta 2 (the latest one) and also in other versions (windbay), but the emulator simply won't start.In the latest version it tells me he's got some problems with the "TCP connection" and in the Windbay he tell me ...
Hi I am trying to create a server application that, once started, a Pocket PC application can connect to to retrive data. I cant even get a connection established with the Pocket PC device. I am constantly getting the socket exception saying the host activly refused the connection.I am using ...
I just started to learn about programming for smartphones. Environment: VS 2005 Beta2, .NET Framework 2.0 Windows Mobile 5.0 Smartphone SDK.Questions: When I run the projects, there is always an error: 0x80040154.It seems that I cannot connect the Emulator.Could you tell me how to deal with ...
147 byte By
show at 2008-2-15
Environment vs2005 windows mobile 5.0 ActiveSync 4.0 Question: how Device Emulator connection to internet? thanks
Hii am working on windows mobile5 project(oon VPC2004), in Emulator Manager,i clicked Connect and it didnt show any error.In Eumlator itself ,in network option,NE200 option is enabled,Now In Intenret Explorer, when i enter my local IIS address http://192.168.0.3 or any website like cnn.com,it ...
Hello Friends i am newbie in mobile development world,i have to peform following tasks connection of SQL Mobile with Sql2005 ,present on desktop my project requires webservices,so i need to connect web service on my local machine and on Internet i launched Active SYnch from Desktop,it ...
If somebody could please help me out here, I would really appreciate it.I am trying to get the stand alone Device Emulator.I clicked on the DeviceEmulator050419.msi link and got this error:"there was an error launching the File Transfer Manager. Please try again later or contact your help ...
147 byte By
show at 2008-2-14
Environment vs2005 windows mobile 5.0 ActiveSync 4.0 Question: how Device Emulator connection to internet? thanks
I successfully connect to the Internet using 2005 VS beta DE, however, if left idle, the DE appears to disconnect and can no longer navigate to different websites. I poked around the registry and found the setting:hklm\comm\parms\allowsuspend set to 1 vs. the default listed on msdn as 0. Should ...
210 byte By
show at 2008-2-13
Unable to start program '%csidl-program-files%\comp\comp.exe'. operation not supported . unknown error :0x89731904. " work under vs 2005 . windows mobile 5.0" is anybody can help me thanks
Hello Again,I was wondering if someone new where/how to change the options which appear in the bottom left and right of the Today screen. I notice on the VS Studio 2005 Beta version of the DE, the options are "Notifications" and "Contacts". On the DE 1.0 Preview Edition, there is one option, on ...
does anybody know if it is possible to use a USB bluetooth dongle to give the emulator bluetooth accessibilty?
I have installed following 1. VC 2005 beta2 2. Activesync 4.0 2. DMA Transport patch 3. PPC 5.0 SDK then lauched device emulator mgr, connect 'windows mobile 5.0 ppc emulator' that was succeeded, but then can't connect to activesync. I selected 'DMA connect' in emulator's activesync where ...
I'm probably just not following instructions correctly...WinXP Pro SP2ActiveSync 3.8Downloaded standalone DeviceEmulator050419.msi. Following the Installation and General Usage Instructions. Step 1, Install Emulator, done and no error messages. Step 2, Register Device Emulator, done and no ...
Hello, I am very impressed with the Device Emulator. When I run the DE with a DESS file which had been saved with NE2000 networking enabled and a sharedfolder, when the DE starts, I receive two unwanted prompts: Do you want to enable emulation of NE2000 Network Card?andDo you want to allow ...
Hi,Looking at the new documentation (With the WM 5 SDK) for edit boxes,nothing has changed, however in the emulator, the behavior is different thanprevious versions of Windows Mobile:In a single-line edit box, the normal behavior is to press the default buttonof a containing dialog if the enter ...
I am trying to build a simple test app that loads a text file via the SmartPhone 2003 SE Emulator, however I can't figure out where to store my input files on the desktop so that the Emulator can see them. Any help appreciated.
342 byte By
CMR at 2008-2-7
Today I downloaded and installed the latest Device Emulator Community Preview. I'd like to be able to use this emulator when debugging apps in VS 2003, but when I select the PPC 2003 Emulator, it launches the previous emulator version. How do I get the latest version to show up on my list of ...
I have installed VS 2005 beta 2 and trying to create a smart device app.I have also installed Pocket PC 2003 SE emulater, however when i debug my app it gives me an error: Device emulator is not detected. Install the device emulator.I am not sure that do I have to do some config or i have the ...
<font size="2">There is no support in msdn or code for using ARM Assembler. Where to find functioning example or the structure for an arm assembler file for VS 2005 and the armasm assembler? Thx in advance. Martin</font>
Hi,does the device emulator supports ARM assembler written i a little asm file, compiled and linked to a normal app.exe written in C/C++?I don't know i gettin' every time an access violation ( illegal instaruction ). It is fairly simple code:in header just declaration: extern "C" void ...
477 byte By
Jaimz at 2008-2-6
i installed VS 2005 beta 1 refresh, then i unistalled everything but i forgot to uninstall "Microsoft Visual Studio Emulator for Devices -ENU" Now, i can't install beta 2 because that's installed and i can't uninstall that because it can't find the vs_emulator.msi i've lost my beta 1 disks ...
Hi,I am getting the following error while building a WinCE5.0 image in platform builder. It is an ARM based OS image. Can any one explain to me what this "assertion failed" failed erroe means and how it can be corrected. "Writing F:\WINCE500\PBWorkspaces\IP\RelDir\DM320_ARMV4I_Release\NK.bin ...
Hi,I have already developed application for PPC 2002. I am using Compact Framework 1.0, SQLCe2.0 and VS.NET 2003 for development. My application supports on PPC2000,PPC2002 and PPC2003. I am looking for information whether my application support for Windows Mobile 5.0.I have downloaded Windows ...
I have VS2005 beta 2 installed and would like to test Exchange ActiveSync synchronization using the Device Emulator and a Windows Mobile 5 image. Can this be done with the emulator? What are the configuration steps on the emulator? Thanks, Frank
I created a very simple web site using asp.net 2.0 mobile forms/controls and all I wanted to do is see what it looks like in one of the device emulators (Pocket PC 2003 Emulator). After working on this for a few days I was able get the emulator to do the everything except the one item I need it ...
Hi My Problem is, the computer freezes when trying to to connect over active sync I start ActiveSync, I start the Emulator then I start the device manager and tell him to "cradle" the device ActiveSync gehts a connection shortly after this -> Freeze! On which plattforms runs the Emulator? ...
356 byte By
Fleker at 2008-2-4
Hello My name is Manuel and I Live in Spain .My Question is :I need to do a call to the Emulator from Visual Basic .NET, recovering the last configuration. I try to realize a call with " DeviceEmulator.exe/s ppc.dess " but I do not obtain it!! Since I can open the emulator using the last ...
Possibly the wrong place to ask see final sentence. I have a service which I register under the service entry section. The service run on a 2003 device and was build with 2003 SDK. The service does not get loaded on a 2005 emulator and neither, I’ve just found, does it get loaded on a real ...
Hi,does the device emulator supports ARM assembler written i a little asm file, compiled and linked to a normal app.exe written in C/C++?I don't know i gettin' every time an access violation ( illegal instaruction ). It is fairly simple code:in header just declaration: extern "C" void ...
How to manually transfer an app to device emulator? I wanna transfer an console app ( binary ) to smartphone (Windows CE 5.0 )emulator and start it. Thx in advance
562 byte By
csann at 2008-2-2
I've been floundering around with settings trying to get the emulator connected to the internet with no success. I've read some of the posts that tell about using ActiveSync instead of the TCP/IP connection. I've tried selecting cradle from the Device Emulator Manager with no success. But I ...