Hi there,I have a problem running the games from EA Sports - FIFA 07 and NHL 07 on Vista RC2 (build 5744). The games seem to be OK until I try to start a match (on both games) ... the game is a lot faster than it should be so it is nearly impossible to play it... In NHL 07 I can not even set ...

The exact error is: The operating system is not adequate for running ATT Natural Voices 1_4 Engine and Crystal16.Tried the compatibility modes but to no ...

I just got windows xp 64 bit edition and Im trying to play movies in it but it isnt letting me. I tried with WMV realplayer and directX I have a ati 9600 radeon pro graphics card if that helps with anything anyone know how I could get dvds running? (Yea i got a dvd drive)

Hi all, I have followed everything and things appear to be installed. However when I bring up the management console for VS I get this error message: An error occurred accessing the website application data folder. The virtual machine folders are located in "\\Users\Public\Public ...

Hi again,I do not know if this is a right place to put this thread in but I do not know where exactly can I write the Vista RC2 feedback...I have bluetooth on my laptop and automatically the Bluetooth icon appears in the notification area (bottom right screen corner near the system clock). I ...

We use WinInet to send HTTP request and get response. On Windows XP, it works fine. However, I got timeout error on Vista. The timeout occur when calling InternetReadFile(). I tried many times. Sometimes, It works; Sometimes does not. My Vista version is RC1 build 5600. I am not sure this is a ...

Hello,I have been testing Windows Vista RC1 in our computer enviroment and have hit a wall with the most important application, MBS Navision. I've tried running it in every compatability mode but to no avail. The program fails to launch and I get an error in my event viewer.The question I want ...

We are testing our applications for Windows Vista, and only were able to run Microsoft Application Verifier 3.2 and Microsoft Standard User Analyzer to test our applications and see the results.We did also try Microsoft Application Compatibility Toolkit (ACT) v4.1 or 5.0 but after trying this ...

I have encountered a privilege difference in Windows Installer between XP and Vista RC1 which makes our installation fail. I have searched for an explanation and workaround but haven't found anything so far. This is NOT a UAC issue: the difference in privileges is there even when UAC is ...

We are using some demanding MS Access 2000 applications on Windows XP PC's and need them to perform faster.Will a 64 bit system (e.g. vista 64 + intel core 2 duo) improve performance of 32 bit applications, or will it work better to move to the fastest available 32 bit ...

hey folks.I've installed VISTA RC1 5744, installed my software, tested it.What do I do next? Do I just say "it works" and then put a sticker on the box for the next print run?I'm only taking the steps towards getting the "Works with" vista logo for this batch of products ...

Hi,I was checking compatibility of one of my MFC application in Vista OS. Usually if the MFC shared dlls are not present, i used to copy them in WinSXS under folder with the required folder name like x86_Microsoft.VC80.xxxx. (Installing VC++ Redist also didnt work in my case.) And this would ...

I have been having problems with the pci and usb Linksys wireless adapters when I installed windows vista RC1 build 5600. It always gives me these errors: Can't load ProcNIC'sdll and Can't load Res_dll Maybe I need to find drivers for windows vista and if they are not there then I guess I ...

Does anyone else have any errors with the VIMICRO USB PC CAMERA on Vista, it worked fine under XP SP2, however i have tried using it on vista & Windows Live Messenger (Which its designed for), and it can load all the drivers etc, but always displays a black screen?.Has anyone managed to ...

every time i try to install office pro 2007 beta on vista i get a error and the setup fails anybody have i solution?

can anyone tell me why there is no audio in chat rooms?

Hi there.Yesterday I have installed Vista rc2 (b. 5744) and I tried to install Alcohol 120 Software (virtual cd-rom emulation and creation). Installation seemed fine but after I restarted my system and logged on I had a serious problem - after a few second the screen started somehow ...

<P>When I want setup Vista RC1 from DOS, I will need to install raid driver. When I put floppy into floppy-drive, setup begin copy driver-files to HDD, when I will seen "blue screen" with error.</P> <P>This driver was worked correctly in Vista Beta 2. How can I correct this problem.</P>

Now that Vista no longer lets you write files to the "Program Files" directory (after the initial install) my app doesnt work correctly. The Vista security design feature (aka the newly introduced MS redirecting driver) now takes the files that were going to the the "Program ...

Have been unable to have Vista recognizeXP driver for Visioneer 8900 Scanner. Driver is version 3.0 using PaperPort 7.0. The drivers available at Visioneer are not compatible either. Anyone have success installing the above scanner?

We have modified our application to comply to Vista Application Compatibility Cookbook, and we have applied to "Works With Windows Vista" logo, but on the page http://microsoft.mrmpslc.com/VistaPlatformAdoption/Secure/WorksWithTestStatus.aspx there is a note "Beginning in August, ...

I've got an application that provides similar functionality to the Device Manager. It displays the devices by "category" similar to the list view in the Device Manager.It gets the category string from the registry... specifically the "default" string value at each one of ...

Out application allows user to launch browser and show some web pages. The pages are in our company’s web site. This works fine on Windows XP. However, does not work on Vista. I can see a blank browser window only. To make it work, I have to turn off “Protected Mode” for both Internet and Local ...

Hello Everyone: I have wrote some code using MFC CAsyncSocket to broadcast. The program run correctly under Windows XP, but not Vista(). The broadcast packets cannot be captured when running in Vista. Is there some MFC supporting problem for Vista? Or other reasons? I need your HELP! Thanks a ...

While trialling Vista RC2 (5744) I went to install and run my favorite screen saver "Cuckoo Clock 3D " from 3Planesoft I got this error Debugger detected [97]The install seems to work fine, it's when I try and run the thing or change any settings that the error appears. It worked ...

My program does not work properly on Windows Vista Japanese.It's using IME functions.You can recreate same problem with MultiUI sample program which is provided by Microsoft.You can see this problem with following instruction:1. Compile and run MultiUIIt's ...

Dear all,Migrating our core development platform to Windows Vista, one of our Windows services using smartcards is failing.We have debugged the problem and found that the event provided by the function ScardAccessStartedEvent does not receive notification. This event is supposed to signal when ...

Hi there.Yesterday I have installed Vista rc2 (b. 5744) and I tried to install Alcohol 120 Software (virtual cd-rom emulation and creation). Installation seemed fine but after I restarted my system and logged on I had a serious problem - after a few second the screen started somehow ...

We use WinInet to send HTTP request and get response. On Windows XP, it works fine. However, I got timeout error on Vista. The timeout occur when calling InternetReadFile(). I tried many times. Sometimes, It works; Sometimes does not. My Vista version is RC1 build 5600. I am not sure this is a ...

Out application allows user to launch browser and show some web pages. The pages are in our company’s web site. This works fine on Windows XP. However, does not work on Vista. I can see a blank browser window only. To make it work, I have to turn off “Protected Mode” for both Internet and Local ...

I WAS IN THE LATER STAGES OF UPDATING MY COMPUTER "VISTA" WHEN WE RECIEVED A POWER SURGE . MY COMP. IS NOW IN A UNUSEABLE STATE, NO NOTHING WHAT TO DO!!

I have been having problems with the pci and usb Linksys wireless adapters when I installed windows vista RC1 build 5600. It always gives me these errors: Can't load ProcNIC'sdll and Can't load Res_dll Maybe I need to find drivers for windows vista and if they are not there then I guess I ...

Does anyone else have any errors with the VIMICRO USB PC CAMERA on Vista, it worked fine under XP SP2, however i have tried using it on vista & Windows Live Messenger (Which its designed for), and it can load all the drivers etc, but always displays a black screen?.Has anyone managed to ...

Today i installed the C# Visual Studio Express Edition on Vista RC1. The installation semmed to go properly, and when i started it, everthing was working. The problem is, when i try to make a new preject, there are no templates available. Has anybody else had this problem?

can anyone tell me why there is no audio in chat rooms?

I got windows vista rc1 (build 5600) that I downloaded freely from microsoft website..now the question is: "What version of Office - and how can I get it - that works with this copy of windows?"I downloaded Office Technical Refresh but it didn't work. It gave a message which didn't look like ...

Hello,I have been testing Windows Vista RC1 in our computer enviroment and have hit a wall with the most important application, MBS Navision. I've tried running it in every compatability mode but to no avail. The program fails to launch and I get an error in my event viewer.The question I want ...

can anyone tell me why there is no audio in chat rooms?

Does anyone else have any errors with the Microsoft VX3000 webcam on Vista, it worked fine under XP SP2, however i have tried using it on vista & Windows Live Messenger (Which its designed for), and it can load all the drivers etc, but always displays a black screen?.Has anyone managed to ...

I have been having problems with the pci and usb Linksys wireless adapters when I installed windows vista RC1 build 5600. It always gives me these errors: Can't load ProcNIC'sdll and Can't load Res_dll Maybe I need to find drivers for windows vista and if they are not there then I guess I ...

Hello Microsoft Support! After download new beta version of Vista 5728,... I have a new big problem. When I install driver for my network card, I need to install Intel(R) Advanced Network Services Virtual Adapter for enable specials futures of my network card. After installation in properties ...

We are testing our applications for Windows Vista, and only were able to run Microsoft Application Verifier 3.2 and Microsoft Standard User Analyzer to test our applications and see the results.We did also try Microsoft Application Compatibility Toolkit (ACT) v4.1 or 5.0 but after trying this ...

We have an application where we need to cancel/suppress autoplay for USB devices that is a mass-storage device class. I found a thread here titled - "Autoplay cancellation fails in Vista" where the author skyrancher says that he was able to get the cancel to work in XP. I'm looking at...

We have modified our application to comply to Vista Application Compatibility Cookbook, and we have applied to "Works With Windows Vista" logo, but on the page http://microsoft.mrmpslc.com/VistaPlatformAdoption/Secure/WorksWithTestStatus.aspx there is a note "Beginning in August, ...

Installing my company's product (which uses an older WISE based installer) it seems that Vista RC1 is marking the path that the programs are installed in as not allowed to do network accesses. (If you run the programs and try to do socket or HTTP calls, they fail with host not found type ...

My program does not work properly on Windows Vista Japanese.It's using IME functions.You can recreate same problem with MultiUI sample program which is provided by Microsoft.You can see this problem with following instruction:1. Compile and run MultiUIIt's ...

Dear all,Migrating our core development platform to Windows Vista, one of our Windows services using smartcards is failing.We have debugged the problem and found that the event provided by the function ScardAccessStartedEvent does not receive notification. This event is supposed to signal when ...

I've got an application that provides similar functionality to the Device Manager. It displays the devices by "category" similar to the list view in the Device Manager.It gets the category string from the registry... specifically the "default" string value at each one of ...

Im having problems finding programs that will give me virtual drives to install my ISO game files I've tried Demontools/alcohol120/virtualclonedvd and none work :( i want my games! help please :D </span>

I saw a thread earlier about VX3000 driver not being compatible with RC1 (build 5600), but the guy mentioned that it was fixed later in a different build. I have build 5728 and it still won't install (harddrive space too small error), so I was wondering which version is it exactly that this ...